 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technology Description ACE705 High efficiency, Low supply current, step-up DC/DC Controller The ACE705 series are CMOS-based PFM step-up DC-DC Controller with low supply current and high output voltage accuracy. Quiescent current drawn from power source is as low as 6uA. It is capable of delivering 500mA output current at 4.0V output with 2V input Voltage. Only four external components are necessary: An inductor, a Schottky diode, an output filter capacitor and a NMOSFET or a NPN transistor All of these features make ACE705 series be suitable for the portable devices, which are supplied by a single battery to four-cell batteries. ACE705 has a drive pin (EXT) for external transistor. So it is possible to load a large output current with a power transistor which has a low saturation voltage. ACE705 integrates stable reference circuits and trimming technology, so it can afford high precision and low temperature-drift coefficient of the output voltage. ACE705 is available in SOT-23-3 and SOT-23-5 packages which are PB free. And in SOT-23-5 the device can be switch on or off easily by CE pin, to minimize the standby supply current. Features * * * * * * * * * * Deliver 500mA at 4.0V Output voltage with 2.0V input Voltage The converter output voltage can be adjusted from 2.5V6.0V(In 0.1V step) Output voltage accuracy -----------2 Low temperature-drift coefficient of the output voltage------------------100ppm/ Only four external components are necessary: An inductor, a Schottky diode an output filter capacitor and a NMOSFET or a NPN transistor High power conversion efficiency---90 Low quiescent current drawn from power source------------------------------------- 6uA Application Power source for PDA. DSC. MP3 Player. electronic toy and wireless mouse Power source for a single or dual-cell battery-powered equipments Power source for LED Absolute Maximum Ratings Parameter Input voltage range Input voltage CE pin voltage EXT pin output current Maximum power dissipation, Pd T=25 SOT-23-5 SOT-23-3 Maximum junction temperature Operating free-air temperature range Storage temperature range Symbol Max Unit -0.3~12 V V(EXT) -0.3~Vout+0.3 V -0.3~Vout+0.3 V 0.7 A 0.25 0.15 150 -20~80 -40~125 W VER 1.2 1 Technology Packaging Type SOT-23-3 3 ACE705 High efficiency, multi-funtion step-up DC/DC Controller SOT-23-5 5 4 1 2 1 2 3 Pin SOT-23-3 SOT-23-5 Function VSS(GND) 1 4 Ground pin VOUT 2 2 Output pin, power supply for internal circuits Ext 3 5 Switching pin NC 3 CE 1 Chip enable pin (active high) Ordering information Selection Guide ACE705 X XX XX + H Halogen - free Pb - free BN : SOT-23-5 BM : SOT-23-3 Output Voltage : 2.5V / 3.0V ..... 6.0V Function Description : 1 : Without Enable circuit 2 : With Enable circuit VER 1.2 2 Technology Block Diagram ACE705 High efficiency, multi-funtion step-up DC/DC Controller ACE705 Recommended Work Conditions Item Input voltage range Inductor Min Nom Max Unit 0.8 Vout V 10 27 100 H Input capacitor 0 10 F Output capacitor 47 100 220 F Vout pin filter capacitor 1 nF Operating junction temperature -20 85 OC *Suggestion: Use tantalum type capacitor to reduce the ripple of the output voltage. Use 1nF filter ceramic type capacitor to connect Vout pin and GND pin. The filter capacitor is recommended as close as possible to Vout pin and GND pin. Electrical Characteristics Default condition (unless otherwise provided): Vin=0.6xVout, Iout=10mA.Temperature=25. Use external circuit in test circuit list. Parameter Symbol Test Conditions Min Typ Max Unit 2.45 2.5 2.55 2.646 2.7 2.754 2.94 3.0 3.06 3.234 3.3 3.366 Output Voltage Vout V 3.528 3.6 3.672 3.92 4.0 4.08 4.9 5.0 5.1 5.88 6.0 6.12 Input Voltage Vin 12 V VER 1.2 3 Technology Input Current * (no load) Quiescent current * Chip leakage current CE "H: threshold voltage CE "L" threshold voltage Oscillator frequency CE "H" CE "L" EXT "H" output current Lin IDD Istandby VCEH VCEL FOSC ICEH ICEL IEXTH ACE705 25 8 1 uA uA uA V 0.6 400 0.5 0.5 V Khz uA uA mA High efficiency, multi-funtion step-up DC/DC Controller Iout=0mA, Vin=Vout*0.6 No external component, Vout=Voutx1.05 VCE=0V VCE:0 2V VCE:2 0V 0.6 20 6 0.9 0.3 EXT "H" output current Oscillator duty cycle Efficiency Note : 1. 2. 3. 4. 5. IEXTL Duty Vout=Vout*0.96 Test EXT pin frequency Vout=VCE=6V Vout=VCE=6V 3.0V<=Vout<=3.9V 4.0V<=Vout<=4.9V 5.0V<=Vout<=6.9V 3.0V<=Vout<=3.9V 4.0V<=Vout<=4.9V 5.0V<=Vout<=6.9V On(Vlx "L") side 300 -0.5 -0.5 350 0 0 -21 -35 -41 23 25 31 75 90 mA 80 % % 70 Diode: Schottky type, such as: 1N5817, 1N5819, 1N5822 Inductor: 27uH(R<0.5) Output Capacitor: 100uF (Tantalum type) Vout pin filter capacitor: 1nF (Ceramic type) Input capacitor: 47uF Typical Application (1) Application with external NMOSFET Vin L 27uH EXT Cin 47uF CE OFF ON ACE705 Cout D 1N5817 Vout OUT Rload GND Cp 1nF 100uF Tan Fig2 VER 1.2 4 Technology (2) Application with external NPN transistor ACE705 High efficiency, multi-funtion step-up DC/DC Controller ACE705 Fig3 Note: R1=330, C1=10nF. (R1 can be calculated by load. If load is light R1's value can be added. If load is heavy R1's value can be smaller. ) Detailed Description The ACE705 series are boost structure, voltage-type pulse-frequency modulation(PFM) step-up DC-DC controller. Only four external components are necessary: an inductor, a schottky diode, an output filter capacitor and a NMOSFET or a NPN transistor. The step-up DC-DC converter, constructed by ACE705, can be adjusted from 2.5V to 6.0V, 0.1V step. By using the depletion technics, the quiescent current drawn from power source is lower than 8uA. The high efficiency device consists of resistors for output voltage detection and trimming, a start-up voltage circuit, an oscillator, a reference circuit, a PFM control circuit, a switch protection circuit and a driver transistor. ACE705 integrates PFM control system. This system controls fixed power switch on duty cycle frequency to stabilize output voltage by calculating results of other blocks which sense input voltage, output voltage, output current and load conditions. In PFM modulation system, the frequency and pulse width is fixed. The duty cycle is adjusted by skipping pulses, so that switch on-time is changed based on the conditions such as input voltage, output current and load. The oscillate block inside ACE705 provides fixed frequency and pulse width wave. The reference circuit provides stable reference voltage to output stable output voltage. Because internal trimming technology is used, the chip output change less than 2%. At the same timethe problem of temperature-drift coefficient of output voltage is considered in design, so temperature-drift coefficient of output voltage is less than 100ppm/ High-gain differential error amplifier guarantees stable output voltage at difference input voltage and load. In order to reduce ripple and noise, the error amplifier is designed with high band-with. ACE705 has a drive pin (EXT) for external transistor. So it is possible to load a large output current with a power transistor and a low saturation voltage. At very light load condition, the switch current and quiescent current of chip will effect efficiency certainly. So in very light load condition, the efficiency will drop. Therefore, it is recommended that user use ACE705 in the condition of load current as large as several tens of mA to several hundreds of mA VER 1.2 5 Technology ACE705 High efficiency, multi-funtion step-up DC/DC Controller Selection of the External Components Thus it can be seen, the inductor, schottky diode and external NMOSFET or NPN transistor. affect the conversion efficiency greatly. The inductor and the capacitor also have great influence on the output voltage ripple of the converter. So it is necessary to choose a suitable inductor, a capacitor, an external NMOSFET or NPN transistor and a right schottky diode, to obtain high efficiency and low ripple. Before discussionwe define DVout-Vin / Vout (1)Inductor Selection Above all, we should define the minimum value of the inductor that can ensure the boost DC-DC to operate in the continuous current-mode condition. LminD(1-D)2RL / 2f The above expression is got under conditions of continuous current mode, neglect Schottky diode's voltage, ESR of both inductor and capacitor. The actual value is greater that it. If inductor's value is less than Lminthe efficiency of DC-DC converter will drop greatly, and the DC-DC circuit will not be stable. Secondly, consider the ripple of the output voltage, I=DVin / Lf Im ax=Vin / (1-D)2RL + DVin / 2Lf If inductor value is too small, the current ripple through it will be great. Then the current through diode and power switch will be great. Because the power switch on chip is not ideal switch, the energy of switch will improve. The efficiency will fall. Thirdlyin general, smaller inductor values supply more output current while larger values start up with lower input voltage and acquire high efficiency. An inductor value of 3uH to 1mH works well in most applications. If DC-DC converter delivers large output current (for example: output current is great than 50mA), large inductor value is recommended in order to improve efficiency. If DC-DC must output very large current at low input supply voltage, small inductor value is recommended. The ESR of inductor will effect efficiency greatly. Suppose ESR value of inductor is rLRload is load resistorthen the energy can be calculated by following expression: RL / Rload (1-D)2 For example: input 1.5V, output is 3.0V, Rload=20, rL=0.5, The energy loss is 10%. Consider all aboveinductor value of 47uHESR<0.5 is recommended in most applications. Large value is recommended in high efficiency applications and smaller value is recommended VER 1.2 6 Technology (2)Output Capacitor Selection Ignore ESR of capacitorthe ripple of output voltage is: R=Vout / Vout=D / Rload Cf ACE705 High efficiency, multi-funtion step-up DC/DC Controller So large value capacitor is needed to reduce ripple. But too large capacitor value will slow down system reaction and cost will improve. So 100uF capacitor is recommended. Larger capacitor value will be used in large output current system. If output current is small (<10mA), small value is needed. Consider ESR of capacitorripple will increase r'=r+ImaxRESR / Vout When current is large, ripple caused by ESR will be main factor. It may be greater than 100mVThe ESR will affects efficiency and increase energy loss. So low-ESR capacitor (for example: tantalum capacitor) is recommend or connect two or more filter capacitors in parallel. (3)Diode Selection Rectifier diode will affects efficiency greatlyThough a common diode (such as 1N4148) will work well for light loadit will reduce about 5%~10% efficiency for heavy loadFor optimum performance, a Schottky diode (such as 1N58171N58191N5822) is recommended. (4)Input Capacitor If supply voltage is stable, the DC-DC circuit can output low ripple, low noise and stable voltage without input capacitor. If voltage source is far away from DC-DC circuit, input capacitor value greater than 10uF is recommended. (5)Vout~GND filter Capacitor Because the chip's switch current flows from Vout pin, then through the chip into GND pin. Therefore if the output capacitor's two pins were not very near the chip's Vout pin and GND pin, Vout `s stable would be affected. User will found that the output voltage will drop when load grows up if the output capacitor's two pin is not very near the chip's Vout pin and GND pin. In this condition, 1nF ceramic capacitor is recommended at very near the chip's Vout pin and GND pin. So in all ACE705 application, two capacitors are needed to obtain stable output voltage. The 100F tantalum output capacitor is recommended to stable output voltage nearby load. The 1nF Vout pin to GND pin ceramic filter capacitor is recommended to stable chip's sense voltage. VER 1.2 7 Technology Test Circuits (1) Output voltage test circuit ACE705 High efficiency, multi-funtion step-up DC/DC Controller ACE705 Fig4 (2) Quiescent current test circuit ACE705 Fig5 (3) Input Current (no load) test circuit ACE705 Fig6 (4) Oscillator frequency and duty cycle test circuit ACE705 Fig7 VER 1.2 8 Technology Extend Applications (1) 12V step-up application ACE705 High efficiency, multi-funtion step-up DC/DC Controller ACE705 Fig8 Note: ACE705's output voltage is 6V. When the output current is small or no load, the output voltage will be unstable, use the RZD for flowing the bias current through the zener diode. For step-up application, a diode(for example: 1N4148) is needed as starter circuit. (2) Step-down application ACE705 Fig9 Note: In step-down application, use starter circuit as above. 2.5VVzenerVout. RST is needed for bias current of zener diode. This starter circuit also can be used in high voltage step-up application. VER 1.2 9 Technology (3) Flyback step-up/step-down application ACE705 High efficiency, multi-funtion step-up DC/DC Controller ACE705 Fig10 Note: In step-down and step-up/step-down application, starter circuit in fig 8 is need. In step-up application, simpler starter circuit in fig 9 can be used. Typical Characteristic (Recommended operating conditions: L=10uH, Cin=47uF, Cout=100uF, Topt=25, unless otherwise noted) 1.Output Voltage VS. Output Current ACE705230BN+ Output Voltage VS. Output Current 2.Output Voltage VS. Output Current ACE705240BN+ Output Voltage VS. Output Current Iout (mA) Iout (mA) 3.Output Voltage VS. Output Current ACE705260BN+ Output Voltage VS. Output Current 4.Efficiency VS. Output Current ACE705230BN+ Efficiency VS. Output Current Iout (mA) Iout (mA) VER 1.2 10 Technology 5. Efficiency VS. Output Current ACE705240BN+ Efficiency VS. Output Current ACE705 High efficiency, multi-funtion step-up DC/DC Controller 6.Efficiency VS. Output Current ACE705260BN+ Efficiency VS. Output Current Iout (mA) Iout (mA) 7. Ripple VS. Output Current ACE705230BN+ Ripple VS. Output Current 8.Ripple VS. Output Current ACE705240BN+ Ripple VS. Output Current Iout (mA) Iout (mA) 9. Ripple VS. Output Current ACE705260BN+ Ripple VS. Output Current Iout (mA) VER 1.2 11 Technology Packing Information SOT-23-3 ACE705 High efficiency, multi-funtion step-up DC/DC Controller VER 1.2 12 Technology Packing Information SOT-23-5 ACE705 High efficiency, multi-funtion step-up DC/DC Controller VER 1.2 13 Technology ACE705 High efficiency, multi-funtion step-up DC/DC Controller Notes ACE does not assume any responsibility for use as critical components in life support devices or systems without the express written approval of the president and general counsel of ACE Electronics Co., LTD. As sued herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and shoes failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ACE Technology Co., LTD. http://www.ace-ele.com/ VER 1.2 14 |
Price & Availability of ACE705160BMH
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |